C-FIX
For the dimensioning of steel and bonded anchors in concrete as well as injection systems in masonry.
C-FIX

C-FIX-Online 

Includes current design standards, e.g. EN 1992-4 and EOTA TR 054 for the dimensioning of steel and bonded anchors in concrete as well as injection systems for anchoring in masonry. The anchor design in concrete can be performed either assuming a rigid base plate following a linear strain distribution or considering realistic stiffness conditions using a spring modeling approach.

Go to C-FIX online

usb flash driver format tool ufix-ii

Advantages C-FIX Online:

  • The calculation of the anchor forces is performed in the software.
  • The stiffness of the base plate can be verified
  • Easy optimizing of the anchorages is possible
  • Multiple load cases can be defined and designed
  • The profile and the stiffeners are also considered for the calculation
  • The realistic deformations and stresses are shown
  • The FEM Design can be used also to check existing anchorages
  • Optionally, it is possible to perform the base plate design by checking the steel stress in all parts of the connection, as well as the welds, hole bearing resistance and concrete compression below the base plate
 
usb flash driver format tool ufix-ii

Usb Flash Driver Format Tool Ufix-ii ~upd~ Here

We have all experienced that dreaded moment. You plug your USB flash drive into your computer, expecting to access critical files, but instead, you are greeted with:

: Once finished, the tool will signal success. Safely eject the drive and reconnect it to verify it is working correctly. When to Use Ufix-II vs. Alternatives usb flash driver format tool ufix-ii

: Can update the drive's firmware to resolve persistent internal controller issues. We have all experienced that dreaded moment

Before using Ufix-II, it is often safer to try: When to Use Ufix-II vs

A standout feature of UFix-II, and a key reason for its popularity among IT technicians, is its ability to remove write-protection. Write-protection is a safety feature, but it can malfunction, locking users out of their own hardware. When a drive is write-protected, no data can be added or removed, and standard formatting tools are disabled. UFix-II interacts directly with the drive's firmware and controllers, bypassing the operating system’s restrictions to force a reset of the drive's status. This capability transforms a seemingly "dead" drive back into a functional storage device, saving the user the cost of replacement and reducing electronic waste.

Your time is valuable

The FEM calculation tool provides you with further information to design a sufficiently stiff base plate. It is no longer necessary to switch between the anchor design software C-FIX Online and a finite element software for the base plate calculation and design. This feature is a real time-saver!

Go to C-FIX online

usb flash driver format tool ufix-ii

C-FIX Offline

In addition to all current design standards C-FIX Offline includes also the verification according to „ENSO“ (Engineering Solution) which allows the calculation of extended design models that are possible according to fib. Furthermore, the module settings can be individually adapted to the local requirements.

To the offline version

usb flash driver format tool ufix-ii

Advantages C-FIX Offline

  • Design of injection systems in masonry.
  • Design under dynamic actions - threshold or alternating loads.
  • Design under seismic action (earthquake).
  • Measurement under extraordinary stress.
usb flash driver format tool ufix-ii

Download and System requirements FiXperience-Offline

Downloads

Online Installer (individual position version)

MSI Network-package for administrators (network-version)​

Offline Installation (CD Version)

System requirements

Main memory: Min. 8 GB
Operating systems:  Windows® 10, Windows® 11
Processor: x64-based processor (ARM processors are not supported)
Note: The current system requirements may vary based on your system configuration and your operating system.

cd-blue-75b965665c-62mfm