Toy Taxi Claw Machine Manual __exclusive__

Most Toy Taxi models use a PCB-based menu system or physical dip switches to customize gameplay.

| Component | Function | Common Manual Page Reference | | --- | --- | --- | | | The brain; controls timing, payout percentages, and motor drivers. | Section 4.2 | | Joystick | 8-directional control (Left/Right/Forward/Back). | Section 2.3 | | Claw Strength Potentiometer | A small dial on the main board to adjust grip voltage (3V to 12V). | Section 5.1 | | Drop Solenoid | Electromagnet that releases the claw at the bottom of the descent. | Section 6.0 | | Prize Sensor (IR Beam) | Infrared beam across the chute; counts wins. | Section 4.7 | | Bill Acceptor / Coin Mech | Optional; interfaces via a harness connector (JST 6-pin). | Appendix B | toy taxi claw machine manual

by Coast to Coast Entertainment is a staple arcade crane machine known for its high-security cabinet and adjustable microprocessor controls. 1. Core System Settings You can access the internal system menu by pressing the "Settings" button inside the front service panel for about 3 seconds. Navigation (Up/Down/Right) to toggle between menu items and the button to save and exit. Game Modes Most Toy Taxi models use a PCB-based menu

: Upon arrival, ensure all zip ties and plastic wrap securing the claw and gantry are removed. | Section 2

A: Yes. Ensure they are lightweight (under 10g) and small enough to fit under the claw.

Claw strength is managed by two primary potentiometers, often labeled , which control voltage to the claw coil: Game Room Guys VR1 (Pickup Strength) : The initial power used to pick up a prize from the floor. VR2 (Carry Strength)