| Error Code | Cause | Solution | | :--- | :--- | :--- | | STATUS_SEC_AUTH_FILE_NEEDED | Auth file not loaded or wrong file. | Re-select the new auth file. Ensure it’s not zero bytes. | | S_BROM_CMD_SEND_DA_FAIL | Driver issue or bricked Preloader. | Short test points (EDL mode) or reinstall VCOM drivers. | | STATUS_SEC_INVALID_SIGNATURE | Auth file is corrupted or expired. | Download a fresher "tecno bb2 auth file new" from a different source. | | BROM ERROR: S_CHKSUM_ERROR | Bad USB cable or unstable connection. | Use an original USB cable. Connect to a USB 2.0 port (not 3.0). |