Power off the device completely and remove the back cover and internal shields. Locate the ISP/EMMC Pinouts : The key points required for AE-Tool connection are CLK, DATA0, and CMD Shorting for EDL
Looking at the board with the and the battery connector at the top : Realme C1 rmx1811 test point AE-Tool
This information is provided for educational and repair purposes only. Bypassing FRP (Factory Reset Protection) or unlocking bootloaders may void warranties or violate local laws. Ensure you own the device. Power off the device completely and remove the
A: Yes. The test point method does not require volume or power buttons to function (except to reboot at the end). Ensure you own the device
You're looking for the test point information for Realme C1 (RMX1811) using AE-Tool. Here's what I found:
: With a pair of fine-tipped tweezers, Leo bridged the two specific test points. The Detection
| Problem | Solution | |---------|----------| | Device not detected as 9008 | Reinstall Qualcomm drivers; try different USB port (USB 2.0 preferred); check shorting technique. | | AE-Tool says "Device not in EDL" | Phone disconnected during shorting. Repeat step 5 exactly. | | Error: "Sahara communication failed" | Wrong driver version or faulty USB cable. Use original cable. | | FRP reset works but lock remains | Perform a factory reset from recovery after FRP reset. | | AE-Tool free version doesn’t support RMX1811 | Some features may be locked. Use licensed version or alternative tools (e.g., Qualcomm Factory Tool, ToolHero). |