| Problem | Likely Cause | Solution | |---------|--------------|----------| | Laser won’t turn on | Dead battery or no battery | Install/replace 9V battery | | Display shows “ERROR” | Target surface too reflective/dark | Use a piece of cardboard or matte tape as target | | Measurement obviously wrong | Wrong reference setting (front vs back) | Press REF to toggle to correct mode | | Flashing “Lo” icon | Low battery | Replace battery immediately | | Laser dot appears weak | Dirty lens or dying battery | Clean lens; replace battery | | Freezes after measurement | Static discharge or low battery | Remove battery for 10 sec, reinsert |
The device features a digital display that provides measurements in inches, feet, and centimeters. Point-N-Measure Digital Tape W5746 User Manual
The Point-N-Measure Digital Tape W5746 features a 3-second power button hold for operation, auto-shutoff after 150 seconds, and requires 1.5V AAA batteries. It offers single-distance laser measurement, area/volume calculations, and unit switching between meters, feet, and inches, alongside a physical steel tape with a locking mechanism. For full operating instructions, see the 1pc Laser Tape Measure User Manual Alleenonline.nl Digital Measuring Tape - Alleenonline.nl | Problem | Likely Cause | Solution |