Planswift Earthwork Pro V3 ((link)) -

How does it stack up against dedicated solutions?

You only do simple 2D takeoffs (e.g., linear pavement marking) or rarely do earthwork. In that case, standard PlanSwift is sufficient.

If you move dirt for a living and use PlanSwift, Earthwork Pro v3 isn’t an upgrade—it’s a necessity. planswift earthwork pro v3

Using manual grid and scale methods, the estimator bid the project at 22,500 CY cut and 18,000 CY fill, requiring haul-off of 4,500 CY at $10/CY ($45,000 cost).

Standard earthwork modules often ignore the complexities of utility trenches or building pads. allows you to isolate subgrade areas. For example: Excavate 10,000 CY for a basement, but only 2,000 CY requires import of structural backfill (gravel). The software tracks these discrete materials separately. How does it stack up against dedicated solutions

: Still requires manual point-clicking; it does not "auto-read" elevation text from PDFs.

: Dramatically reduces the time spent on site takeoff compared to traditional methods by utilizing automated templates and integrated calculation engines. Seamless Integration If you move dirt for a living and

Draw the building footprint (proposed subgrade at EL 98). Draw the pond bottom (EL 95) with side slopes at 3:1. Draw the parking lot with a 2% slope using the "Slope Plane" tool.