1.0 Date: October 2023

Secure the motor to the runner using the brackets and provided hexagonal screws. Fix the front part of the runner to the lintel or ceiling.

: Use the red button to enter force settings. You can adjust the obstacle detection sensitivity using the plus and minus buttons—higher LED counts indicate quicker inversion if the door hits an object. 3. Usage and Maintenance Tips

: Hold the red button for five seconds to adjust sensitivity; more LEDs indicate higher sensitivity for quicker inversion.

. Below is a write-up covering the essential instructions for its installation, use, and maintenance. 1. Installation Instructions

Page 7 — Commissioning & First Use