Lenovo Oem Logo Bmp 120x120 Patched [top] Official

: While 120x120 is used for system info, boot logos are often larger (e.g., 40% of screen resolution), but the BIOS will scale images differently depending on the model. Patching via Lenovo Flash Utility Download the BIOS Update Utility (not the ISO) from the Lenovo Support Website Run the installer but select Extract Only Navigate to the extraction folder (usually C:\DRIVERS\FLASH\xxx

That night, Alex discovered a forum post from 2012: “lenovo oem logo bmp 120x120 patched” —a hacked bootres.dll that allowed custom OEM logos even on UEFI systems. It was dangerous, unsigned, and perfect. lenovo oem logo bmp 120x120 patched

To successfully flash a "patched" logo, technicians typically follow these steps: : While 120x120 is used for system info,

(Optional) Add other strings like "Manufacturer" (Lenovo) or "SupportURL" to match. Method 2: BIOS/UEFI Splash Screen (Boot Logo) To successfully flash a "patched" logo

(4-bit) for older BIOS versions to ensure proper compression. : Typically must be under 30KB or 60KB depending on the specific model's BIOS capacity. Common Installation Methods BIOS Update Utility (WinFlash/WinUPTP) Download the official BIOS update package from Lenovo Support and extract it. Rename your custom image to and place it in the same folder as the utility. Run the utility (e.g., winuptp.exe WinFlash64.exe -patch -logo LOGO.BMP

At 120x120 pixels , the logo fits the standard "small-form" placeholder used in many Lenovo UEFI firmware layouts. Why 120x120?

Usually uncompressed (BI_RGB) to ensure the bootloader can render it instantly. How to Install the Lenovo OEM Logo