La104 Firmware - Work

| Issue | Probable Cause | Solution | | :--- | :--- | :--- | | | Corrupt firmware or driver issue. | Put device in DFU mode (check Device Manager for "STM32 BOOTLOADER"). Install STM32 DFU drivers (use Zadig on Windows). | | Stuck on "Wait for config" | Firmware/Sw mismatch. | Ensure you are using the version of PulseView/Sigrok that matches the firmware version you flashed. | | Flash write failed | Wrong DFU file. | Ensure you are using the file specifically named la104... , not dslogic... (though often they are cross-compatible, verify the release notes). |

: Some older LA104 versions or those with different internal memory (e.g., 8MB vs. 2MB) may require specific firmware builds to function correctly. Firmware upload issues #45 - gabonator LA104 - GitHub la104 firmware work

: Long press both the Power and SMPL buttons while powering on. | Issue | Probable Cause | Solution |

The next morning, John arrived at the office early, eager to implement his new approach. He spent the day rewriting code and testing the changes. The results were promising, but there were still some issues to resolve. | | Stuck on "Wait for config" | Firmware/Sw mismatch