Iso 2768 General Tolerances Pdf Exclusive Official

The standard is split into two critical parts:

| Nominal Size Range | f (Fine) | m (Medium) | c (Coarse) | v (Very Coarse) | | :--- | :--- | :--- | :--- | :--- | | 0.5 up to 3 | ±0.05 | ±0.1 | ±0.2 | — | | >3 up to 6 | ±0.05 | ±0.1 | ±0.3 | ±0.5 | | >6 up to 30 | ±0.1 | ±0.2 | ±0.5 | ±1.0 | | >30 up to 120 | ±0.15 | ±0.3 | ±0.8 | ±1.5 | | >120 up to 400 | ±0.2 | ±0.5 | ±1.2 | ±2.5 | | >400 up to 1000 | ±0.3 | ±0.8 | ±2.0 | ±4.0 | | >1000 up to 2000 | ±0.5 | ±1.2 | ±3.0 | ±6.0 | | >2000 up to 3000 | — | ±2.0 | ±4.0 | ±8.0 | iso 2768 general tolerances pdf exclusive

30 to 120mm: ±0.3mm

Based on the length of the shorter side. The standard is split into two critical parts:

Angles are treated specially. For a 90° angle on a large part, a ±0.5° tolerance is massive. ISO 2768-1 uses to determine tolerance. ISO 2768-1 uses to determine tolerance

±30' for lengths up to 50mm.

Below is the exclusive breakdown of permissible deviations in mm. Note how tolerance increases with nominal size.