: Continuous recording of channel voltages at up to 500 samples per second, saved directly to CSV files. Switchable Output Modes
Unlike standard formatting tools (like Windows Disk Management or Rufus), operates at the firmware level. It can: fc1178bc mptools
| Error Message | Likely Cause | Fix | |---------------|--------------|-----| | "No compatible device found" | Wrong controller version or driver conflict | Reinstall USB drivers; check with ChipGenius. | | "Bad block count exceeds limit" | NAND chip is heavily degraded | Reduce set capacity (e.g., 16GB → 8GB). | | "Write firmware fail" | Corrupted ISP file or unstable power | Use a different USB port (directly on motherboard). | | "Timeout error" | Slow NAND or poor connection | Retry with lower speed setting in Advanced tab. | | "Verify fail after MP" | Faulty NAND chip | Replace drive—cannot be fixed. | : Continuous recording of channel voltages at up
After successfully running MPTools (which takes ~15 minutes for 64GB of TLC NAND), do not trust the drive. Run h2testw twice. The first pass will pass. The second pass will often reveal "new" bad blocks that the FC1178BC's lazy scanning missed. Run MPTools a second time with a higher ECC allowance (5 bits) to quarantine those stragglers. | | "Bad block count exceeds limit" |