Dell D220p 01 Power Supply Pinout 2 (2027)

If cutting the cable, you will typically find 3 white wires (+12V), 3 black wires (GND), 1 blue wire (Remote), and 1 red wire (Sense/Reserved). Mechanical Compatibility: The plug is mechanically similar to an 8-pin EPS12V connector but is electrically unique.

The Dell D220p 01 power supply typically features a standard ATX power connector. Here's a breakdown of the pinout: Dell D220p 01 Power Supply Pinout 2

The following pinout represents the female receptacle (looking straight at it) with the clip fastener on the bottom. Wire Color Description Remote + Used for signaling; must be connected for output 2 +12V Positive 12V output rail 3 +12V Positive 12V output rail 4 +12V Positive 12V output rail 5 Remote Ground Remote Ground/Sense 6 Ground (-) Negative return/Ground 7 Ground (-) Negative return/Ground 8 Ground (-) Negative return/Ground How to Power On (Remote Triggering) If cutting the cable, you will typically find

Looking at the female receptacle (front view), the pinout is generally reported as follows: Wire Color Remote / PS-ON (Must be shorted to Ground to turn on) 2 Ground (GND) 3 Ground (GND) 4 Ground (GND) 5 Here's a breakdown of the pinout: The following

You must short Pin 5 (Blue) to Pin 6 (Black/Ground) .

Once the connection is made, the internal fan should spin up, and you will measure 12V across the power pins. Safety and Conversion Tips