This report outlines the availability and usage of Autodesk EAGLE libraries for the Arduino Pro Micro

| Pin | Signal | Arduino Pin | ATmega32U4 | Notes | |-----|--------|-------------|------------|-------| | 1 | RAW | - | - | Unregulated input (5V variant max 12V) | | 2 | GND | - | - | Ground | | 3 | RST | RESET | Reset | Active low | | 4 | VCC | 5V/3.3V | VCC | Regulated output | | 5 | TX | 1 | PD3 | Serial transmit | | 6 | RX | 0 | PD2 | Serial receive | | 7 | GND | - | - | Ground | | 8 | SCL | 3 | PD0 | I2C clock | | 9 | SDA | 2 | PD1 | I2C data | | 10 | A3 | 3 / A3 | PF4 | Analog input 3 | | 11 | A2 | 2 / A2 | PF5 | Analog input 2 | | 12 | A1 | 1 / A1 | PF6 | Analog input 1 | | 13 | A0 | 0 / A0 | PF7 | Analog input 0 |

The "glue" that links the schematic pins to the physical pads, making the component ready to be "Added" to a design. How to Find and Install the Library